How to Set Up a Stage Sound System

How to Set Up a Stage Sound System?

A stage sound system is important to make sure everyone in the audience can hear the entertainment on stage. Without a proper sound system, nobody will be able to hear the music on stage. A sound system will be able to increase sound coming from the microphone or mixer without distorting the quality.

Do you need to set up a stage sound system? You’ve come to the right page. Today, we’re going to discuss how you can set up a stage sound system to get the best sound quality at your next live event. Keep reading to learn more.

how to set up a stage sound system

How To Set Up A Stage Sound System

Setting up a stage sound system properly takes a specific set of steps, which we will cover on this page. This includes:

  1. Positioning the main speakers and monitors
  2. Setting up power on stage
  3. Arrange the mixing console ; connect the speakers
  4. Sound test and feedback

As you go through this page, we will go into more detail about each of these steps so you fully understand how to set up a stage sound system. When you finish this article, you’ll know how to set up the sound system so your audience can hear what’s on stage.

Start By Positioning The Main Speakers And Monitors

When you’re getting ready to set up the speakers on stage, you need to make sure you place them in the right location. There are many things that you will need to consider to find the right spot to place the speakers. This includes:

  • Size of the venue
  • Accostics
  • Where the stage is located
  • Where the audience will be located
  • Location of power outlets

These are some of the top things you will need to map out, however, you also need to plan out where the performers will be on stage. This is crucial because you will want to position the speakers so the sound is traveling towards the audience and not back at the performers.

If subwoofers are being used as well, you will want to keep them at a distance from the microphones. The best spot to place subwoofers is at the front of the stage. 

Speaker height is another important thing to consider, especially at larger venues. If you want the sound to travel further, then it’s important to raise the speakers. This can be done with racks or scaffolding stands. 

Set Up Power On Stage

When you have your speakers set up, you will need to run power to the stage. This can be done with extension cords, which will be run to each individual speaker and monitor on the stage. Before you run power to the speakers, you will need to connect the subwoofers. Once you do that, you can then run shorter cords to the speakers so they aren’t running across the stage.

However, there is no way to avoid having any power cords running across the stage. To keep them out of the way, you should use gaffer tape to secure the cords in place. This will reduce the chances of an accident occurring once the performance starts. You will also need to use extension cords to connect any instruments or equipment that requires AC voltage.

Always make sure you run power to the stage by following the stage plot. It’s also important for your own safety that you keep the power off until everything has been connected. Before you connect any power to the sound system, you should locate the circuit box to identify audio phases. 

Arrange The Mixing Console And Test The Sound

Once you have the speakers set up and power connected, you can arrange the mixing console. Luckily, you don’t have to be as specific with the mixing console as you do with speakers. You will be able to set the mixing console up on the stage where it’s convenient. However, if you aren’t using a wireless mixer, it should be placed in an area where you can easily connect equipment.

The mixing console will be the final thing you need to set up as far as the stage sound system. One thing you should consider about placement is what the audience will see. It’s a good idea to attempt to be organized and limit on stage clutter with the sound system because it can create a distraction for the audience.

Once you have the mixing console set up and the speakers connected, you should perform a sound test. When you start this, it’s important that you have the main volume on the mixer turned down all the way. Turn the main speakers on first, and then adjust the levels of everything else to get the best sound quality.

A great way to test whether the sound system is to play one of the band’s tracks. This will let you hear what the audience will hear and you can adjust the sound accordingly.

Final Thoughts – How to Set Up a Stage Sound System

If you are setting up a sound system on stage, there are a few steps that you will need to cover to make sure the sound is ready for an audience. If the sound isn’t right, then the audience won’t enjoy the live performance. This is why you need to make sure you take the right steps to set up the stage sound system.

Always analyze the location before you plan out how you are going to set up the sound system. Taking some time to map up how the speakers should be placed for optimal acoustics can improve the quality of the live performance for the audience. It will also ensure that everyone in the venue is able to hear the sound accordingly. 

If everything looks good, you can run power to the sound system. Once it has been powered up, you should always perform a sound test. This way, you will know what the audio quality is like and you can make necessary adjustments. With the right planning and setup, you can improve the sound system quality.

Thank you for reading our article on How to Set Up a Stage Sound System!


How To Use An iPhone As A Webcam