How to Connect a Guitar Amp to a Mixer: A Step-by-Step Guide

So you’re a musician who wants to use your guitar amp with your mixer? You’ve come to the right place! In this article, we will cover how to connect a guitar amp to a mixer and what equipment is needed. We’ll also go over some of the reasons why it’s important for musicians like you and me (whether professional or not) to get our gear set up properly.

How to Connect a Guitar Amp to a Mixer

How To Connect A Guitar Amp To A Mixer? – The Simple Solution

  1. Find the line-out jack on the back of your mixer.
  2. Plug in a cable with a 1/4 inch plug into that jack.
  3. Run the cable to the mixer and plug the cable into one of the channels on the mixer.

I am going to assume you are a total novice or a pastor with no musical training and go over each method that you can use to connect a guitar amp to a mixer. Let’s start with the basics.

What Is A Guitar Amp?

A guitar amp is an amplifier specifically designed to amplify the signal from an electric guitar. A guitar amp will have at least one input, which you plug your guitar into, and one or more outputs which you plug speakers into.

What Is A Mixer?

A mixer is an electronic device that combines multiple audio signals and routes them to different locations. The average mixer has one or more input channels that you can plug a microphone into, and then there is usually some number of line-level inputs which accept signals from other devices such as guitar amps, keyboards, etc. There is also an output for each channel on the mixer – these outputs go to speakers in front of your audience.

How To Connect A Guitar Amplifier To A Mixing Board

How To Connect A Guitar Amp To A Mixer Using The Line Out And A 1/4″ Cable

Equipment Needed

  1. A guitar and amp
  2. A mixing board
  3. A 1/4″ cable

The first way to connect a guitar amp to a mixer is by using the line-out jack on the back of your amplifier and a cable with a ¼” plug. This is the simplest way to do it.

First, find the line-out jack on the back of your amplifier. This is a ¼” jack and it will look like an old-style headphone jack.

Plug in one end of the cable into the line-out jack on your amp and plug the other end of the cable into the input channel on your mixer that you want to use. Adjust the gain, level, and tone controls on the mixing board until you get the sound you are looking for.

That’s all there is to it!

How To Connect A Guitar Amplifier To A Soundboard Using A Microphone

Equipment Needed

  1. A guitar and amp
  2. A soundboard
  3. A condenser microphone
  4. An XLR cable

Another way to connect a guitar amp to a mixer is by using a microphone cable. This is the same kind of cable that you use to connect a microphone to a mixing board.

First, you will need a dynamic microphone like a Shure Sm57. Connect the microphone to a mic cable and run the cable to your soundboard and connect it to one of the channels using an XLR input.

Then you will need to position the microphone in front of your guitar amp.

How To Connect A Guitar Amp To A Mixer Using An Analog Snake

Equipment Needed

  1. A guitar and amp
  2. A mixer
  3. An analog snake
  4. A 1/4″ to XLR male adapter
  5. An XLR Cable

The third way to connect a guitar amp to a mixer is by using an analog snake. This is the most complex way to do it, but it also gives you the most control over your sound.

First, plug in the 1/4″ to XLR male adapter into the line out of your guitar amp.

Then attach the XLR cable to the adapter and run it to the snake and plug it into an open channel on the snake. The snake will take your guitar amp’s signal and run it to your sound mixer.

How To Connect Your Guitar Amp To A Mixer Using A Wireless Transmitter

Equipment Needed

  1. A guitar and amp
  2. A mixing board
  3. A wireless transmitter and receiver

The final way to connect your guitar amp to a mixing board is by using a wireless transmitter and receiver. All you need for this method is the amplifier, soundboard, and transmitter/receiver combo that you can buy on Amazon.

Plug the wireless transmitter into the line-out jack on the back of your guitar amp. Plug the receiver into an open channel on your soundboard. Then adjust your levels.

There are both battery-powered transmitters and receivers and AC-powered transmitters and receivers.

Frequently Asked Questions About How To Connect A Guitar Amp To A Mixer.

Can you plug an amp head into a mixer?

Yes, you can. You will need to use the line-out method of connecting a guitar amp to a mixer.

Can I use my guitar amp’s built-in effects when I connect it to a mixer?

Yes, you can. Whatever is going out through your speakers, is what is going out the line-out output.

Can I use a wireless transmitter to connect my guitar amp to a mixer?

Yes, you can use a wireless transmitter to connect your guitar amp to a mixer. Just plug the transmitter into your amp’s line-out and plug the receiver into an open channel on your mixer.

Is it safe to plug a guitar amp’s speaker output into a mixer?

No, you should not ever do this. The line-out jack on your amplifier is meant for going out of the amplifier and into an external soundboard. If you were to use the speaker outputs from your amp, then you will be amplifying that amplified signal through your mixer and you could damage your equipment.

Can I connect a guitar amp to more than one mixer?

Theoretically, it is possible however, in practicality it is unnecessary.

What is the best way to connect a guitar amp to a mixer?

There is no one “best” way to connect a guitar amp to a mixer. The best option for you will depend on your equipment, the sound that you are trying to get, and how complex of an operation you want.

How To Connect A Guitar Amp To A Mixer: Conclusion

That’s it! That is all there is to connecting a guitar amplifier to a mixer. With these four methods, you should be able to find the perfect way to connect your amp and mixer for your needs.

How To Use An iPhone As A Webcam